So, there she is. These pictures - first posted on NCQ last night - probably won't make the Atlantis site, but any further renders and art done of the Reverence (some of which is coming soon) will use this new model and be posted, along with the ship's revised specs. They are as follows.
Reverence Class Fleet Carrier/Battlecruiser (CVBN)
Estimated Construction Cost:
Approximately 12 Billion USD per unit
Reverence CVBN-96 – 2037
Reverence CVBN-96 – 2039
Reverence CVBN-96 – 2039
Triple layered semi-organic pliant self-regenerating 3rd Generation Bioskin covering a titanium double hull supported by a reinforced composite steel/C65 frame. Hull is protected in key sections by 5 inches of internal, ablative composite armour belt.
Greater than 30,000 feet
Propulsion & Machinery:
2 Williams-Leong Ship Systems Taurus fusion reactors powering 4 Aqua-return hydrojet drives
Maximum: 153 knots
Standard Cruising: 130 knots
IBM-XA Integrated Optical Neural Network (Flight I)
Williams-Leong C.I.877-A-series Neural/Integrated Optics AHAI (Almost-Human A.I.) Network (Flight II)
Internal: Hypersonar; active and passive sensor suites
Effective Range : Approximately 140 nautical miles
3 Deployed WSKRS satellites
3 Deployed WSPRS satellites
Maximum Effective Range : Approximately 300 nautical miles
16 Mk. 1 RAFIT (RApid Firing, Independently Targeting) Six-Tube 21-inch Torpedo Batteries (mounted bows, midships) (Flight I)
20 Mk. 3 RAFIT (RApid Firing, Independently Targeting) Six-Tube 21-inch Torpedo Batteries (mounted bows, midships) (Flight II)
Plasmer Particle Laser Cannon armament:
6 SLR-81 "Banshee" Long Range PPLCs (mounted bows & midships) (Flight I)
6 SLR-82 "Wraith" Long Range PPLCs (mounted bows & midships) (Flight I)
4 SLR-83 "Avenger" Long Range PPLCs (Flight II)
4 SLR-84 "Stingray" Long Range PPLCs (mounted bows & midships) (Flight II)
12 Triton-V "Revelation-II"-class ICBMs, each with 8 MIRVs totalling 3400 megatons. Alternate arrangements can replace nuclear weapons with up to 96 Pathfinder-III hypersonic cruise missiles with either tactical nuclear or conventional payloads.
Mark IX and X Intercept Torpedoes
ECM Packages and Noise Makers
Up to 70 sub-craft of varying types. Arrangements vary from vessel to vessel, but typically:
36 UEO Raptor-II and NSC Seafire Subfighters
12 Stormhawk bombers
4 Sea-Launch Submersible Shuttles
2 Deep Sea Recovery Vehicles (DSRV) (“Pick Ups”)
4 Sea Speeder multi-purpose mini subs
Approximately 700 (Includes ship's crew, Marine contingent and EVA/Subfighter corps)
Yes, there have been revisions made to these statistics to those published on the site, and some might say the ship has been 'downgraded' from its previous speficiations, or at the very least has seen a major rollback on the number of laser cannons it has. I just thought that 16(!) cannons of each type was a little extreme, considering the Atlantis has barely half that in some instances.
Episode 6, which is being written right now, will see some big changes to the story and characters of Atlantis DSV after the events of Episode 5: Shattered Sword. Of course, the most obvious change is the ship the events will revolve around. The UEO Commonwealth will be that ship - the "last" of the original Reverence class Battlecruisers, and the first of the Flight-II variants. Set in 2043, the ship is commanded by someone we've all come to know pretty well. After three years of war, Jim Banick rose through the ranks to the post of Captain, and assumed command of the Commonwealth in late 2042.
The design of the new Reverence has been influenced heavily by the work of NCQ's DG Williams, who not so long ago built the rather popular Antaeus-class strike cruiser that was first read about in Episode 5, and many hallmarks of his design can be found all over the Reverence, including the preference for vertical fins over the previous side-by-side arrangement, a fork-prow, engine arrangements, fighter bays and "nestled" superstructures.
Originally the Antaeus design called for something far longer and dare I say "sleeker" than the compact gunship that resulted. To be fair, DG did such a good job in his work on the Antaeus that I have since had a very hard time seeing the Antaeus in any other configuration. So while the Antaeus is very different (but still very successful) from what I had original imagined, I was still eager to put my original thoughts to work.
It's possible - if I went with what I was thinking originally - that this ship might have ended up being the Antaeus if DG had stuck with that original 'draft'. Thus, the Reverence was born.
For comparison, shown above is the Reverence next to her very-near cousin, the Antaeus. Both ships are rendered to scale.
If you trawl over the earlier posts in this blog and look at some of the progress shots, you will see alot of the changes that were made to the Reverence more clearly. One thing that became very apparent when I first put the Antaeus next to the Reverence was that the top-sides of the latter were comparatively very boring, and didn't really respect the difference in scale between the two ships. This was corrected with the addition of further 'steps' in the superstructure, along with more pronounced bulges down the length of the dorsal hull. The final addition of trenches down each side for laser weapons, like those found on the Antaeus, helped add a little more interest.
Lastly, I want to post this and compare the sheer technical improvement over the original Reverence model made back at the start of 2006. Three years does a lot for 'efficiency'. The new model, sculpted from as few primitive objects as possible, weighs in at just over 75,000 polygons. The original monster was over 590,000(!) and was so render intensive that it simply wasn't really worth the effort.
Keep an eye on the website for all these updates, and new renders of the Reverence class that will be posted in the library.